Archives

Drivers Mate

Andy File Associates Ltd are working on behalf of our client as a recruitment business with regards to this temporary vacancy

Drivers Mate Work

  • Ad-hoc work from a Dinnington base
  • Delivering office furniture and some basic assembly
  • The work is usually single days – on/off basis and often last minute
  • If you are looking for occasional work, this would suit you
  • You must be able to get to Dinnington for a potential early start so car drivers are preferable and a CSCS card would be preferred

Martin Gowland's Job Enquiry Form

  • This field is prefilled with our unique job reference
  • Accepted file types: word, pdf, docx, Max. file size: 6 MB.
  • This field is for validation purposes and should be left unchanged.

Assembly Operative

Andy File Associates Limited are working as a Recruitment Business on behalf of our client with regards this temporary position.

Our very busy client based in Aylesbury  is looking for experienced Assembly Operative  staff to join their team working on an ongoing temporary basis.  For the right person, this role could go temp-perm.

Reporting to the : Production Manager

Key Responsibilities for the Assembly Operative role:

  • Manufacturing parts of septic tanks, plant products , separators and any new products introduced
  • Assembling already made fibre glass cylinders, to form finished assembly
  • Mould preparation and repair and assembly to fibre glass components
  • Using resin and rivet techniques to assembly products
  • Product assembly
  • Reading drawings
  • Maintenance of equipment and work area
  • Manufacture a range of water treatment solutions to the standards defined within the specification and the company quality system
  • Assembly of the full range of  products, to include, reading of drawings, component assembly to finished goods, cutting, drilling, sanding, GRP laminating, sub assembly of steel fabrications, rotors, separator valves
  • Maintenance of equipment and Housekeeping to the highest standards

Person Specification for the Assembly Operative Role :

  • A practical knowledge of assembly techniques
  • Working with resin and fibre glass an advantage
  • The ability to measure accurately and document production activities
  • Need agility and dexterity
  • A mature attitude to work, encompassing health and safety and quality and care

Shift available : 1.30pm – 11.30pm

Days : Monday – Thursday

Transport: Own means of transport needed to get to location as public transport links not available

Pay rate : £11.55 p/h – pay can increase with experience

Training given on : Overhead crane, COSH, working at height and manual handling

Rebecca Thomas Job Enquiry Form

  • This field is prefilled with our unique job reference
  • Accepted file types: word, pdf, docx, Max. file size: 6 MB.
  • This field is for validation purposes and should be left unchanged.

Multi Skilled Operative

Andy File Associates Limited are working as a Recruitment Business on behalf of our client with regards this temporary position.

Our very busy client based in Aylesbury  is looking for experienced Multi Skilled staff to join their team working on an ongoing temporary basis.  For the right person, this role could go temp-perm.

Reporting to the : Production Manager

Key Responsibilities for the Manual Operative role:

  • Manufacturing parts of septic tanks, plant products , separators and any new products introduced
  • Laminating  fibre glass reinforced components
  • Spraying fibre glass units
  • Mould preparation and repair and assembly to fibre glass components
  • Product assembly
  • Reading drawings
  • Maintenance of equipment and work area

Person Specification for the Multi Skilled Operative Role :

  • A practical knowledge of assembly techniques
  • Spraying fibre glass an advantage
  • Experience working with fibre glass an advantage
  • Experience in working with automated press machines is advantageous
  • The ability to measure accurately and document production activities
  • A mature attitude to work, encompassing health and safety and quality and care

Shift available : 1.30pm – 11.30pm

Days : Monday – Thursday

Transport: Own means of transport needed to get to location as public transport links not available

Pay rate : £11.55 p/h – pay can increase with experience

Training given on : Overhead crane, COSH, working at height and manual handling

Rebecca Thomas Job Enquiry Form

  • This field is prefilled with our unique job reference
  • Accepted file types: word, pdf, docx, Max. file size: 6 MB.
  • This field is for validation purposes and should be left unchanged.

Assembly Operative

Andy File Associates Limited are working as a Recruitment Business on behalf of our client with regards this temporary position.

Our client is looking for a Assembly Operative  to work at their Chesterfield site, to start immediately , currently ongoing

Duties for the Assembly Operative Role :

  • Cutting plastic pipes to length
  • Demonstrate accuracy with assembly
  • Experience of using hand tools
  • Drilling pipes to specifications
  • Assembling products
  • You will be required to measure and assemble  products to a high standard ensuring a consistent level of quality is achieved throughout

Hours of work for the Assembly Operative Role:

Mon – Thurs – 7.30am – 4.00pm – 30 min lunch break

Fri                     – 7.30am – 12.30pm

 

Andy File Job Enquiry Form

  • This field is prefilled with our unique job reference
  • Accepted file types: word, pdf, docx, Max. file size: 6 MB.
  • This field is for validation purposes and should be left unchanged.

Bike Assembly

Andy File Associates Limited are working as a Recruitment Business on behalf of our client with regards this temporary position.

Our very busy client based in Rotherham is looking for experienced cyclist or bike assembly staff to join their team working on an ongoing temporary basis.  For the right person, this role could go temp-perm after 12 weeks.

You will predominantly be assembling bikes and helping out in order picking parts and accessories from picking lists and assisting with light assembly work of sports equipment.

Hours of work: Weekly rota of- 7am – 3pm or 8am – 4pm Monday to Friday

 

Oops! We could not locate your form.

 

Assembly Operative

Andy File Associates Limited are working as a Recruitment Business on behalf of our client with regards this temporary position.

Our very busy client based in Aylesbury  is looking for experienced Assembly Operative to join their team working on an ongoing temporary basis.  For the right person, this role could go temp-perm.

Reporting to the : Production Manager

Key Responsibilities for the Manual Operative role:

  • Manufacturing parts of septic tanks, plant products , separators and any new products introduced
  • Assembling  fibre glass reinforced components to build large septic tanks
  • Mould preparation and repair and assembly to fibre glass components
  • Product assembly
  • Reading drawings
  • Maintenance of equipment and work area

Person Specification for the Multi Skilled Operative Role :

  • A practical knowledge of assembly techniques
  • Experience working with fibre glass an advantage
  • Experience in working with automated press machines is advantageous
  • The ability to measure accurately and document production activities
  • A mature attitude to work, encompassing health and safety and quality and care

Shift available : 1.30pm – 11.30pm

Days : Monday – Thursday

Transport: Own means of transport needed to get to location as public transport links not available

Pay rate : £11.55 p/h – pay can increase with experience

Training given on : Overhead crane, COSH, working at height and manual handling

Rebecca Thomas Job Enquiry Form

  • This field is prefilled with our unique job reference
  • Accepted file types: word, pdf, docx, Max. file size: 6 MB.
  • This field is for validation purposes and should be left unchanged.

Electrical Assembly

Andy File Associates are acting as a Recruitment Business with regards this temporary position on behalf of our client.

Electrical Assembler

Temporary role for the duration of 4 weeks minimum

Hours of work: 08:00 – 16:30 Monday to Thursday

08:00 – 13:30 Friday

Unpaid Lunch break: 12:30 -13:00 Monday to Thursday only

Total paid hours per week: 37.5

Hourly rate: £9-£10 per hour

Role

  • Reporting to the Electrical Assembly Supervisor you will be carrying out the following duties:
  • Assembly of electric vehicle battery packs
  • Unpacking lithium Ion battery modules from a pallet and placing them onto a table top assembly jig, Involves lifting 8 Kg modules repeatedly
  • Assembly of the modules into packs involves using a torque wrench and allen key

Assembly of Cables:

  • Once assembled, will be used for high voltage systems on an electric vehicle
  • At the point of assembly there is no electrical risk
  • Assembly consists of accurately measuring and cutting cable from a reel to a specific length (usually between 2.5M and 6M)
  • Each end of the cable has a crimp that is fixed by hand operated tools

Picking Kits:

  • Requires following a picking list of components that are identified with up to a 10 digit part number
  • Components are held line side to the job and do not require entry into stores
  • Once picking is completed the remaining stock requires counting and entering onto a spreadsheet

General Moving of Equipment:

  • Number of areas within the assembly department that require the relocation of equipment and workstations
  • Manually lifting and moving work tables and storage racking
  • Workstations are moved there will be a large amount of salvage stock that will require labeling and counting
  • Good level of numeracy and literacy
  • Ability to record data in hand written format
  • Manual handling and repetitive lifting of up to 8Kg single items
  • Operating of manual pallet handling equipment and the maneuvering of loaded battery stillages
  • Risk assessments will be in place for these roles and full supervision and training where necessary will be applied

 

Martin Gowland's Job Enquiry Form

  • This field is prefilled with our unique job reference
  • Accepted file types: word, pdf, docx, Max. file size: 6 MB.
  • This field is for validation purposes and should be left unchanged.

Electrical Battery Assembly

Andy File Associates are acting as a Recruitment Business with regards this temporary position on behalf of our client.

An opportunity to work in a forward thinking business which is currently going thorough a period of growth

Duties to include:

  • Assembling battery module packs
  • Unpacking 8 kg battery modules from a pallet and assembling them in a jig on a work bench
  • Tools used , Hex Key , Torque wrench

Other duties to include:

  • Picking assembly kits
  • Stock taking

Martin Gowland's Job Enquiry Form

  • This field is prefilled with our unique job reference
  • Accepted file types: word, pdf, docx, Max. file size: 6 MB.
  • This field is for validation purposes and should be left unchanged.

Hose Assembly

Andy File Associates Limited are working as a recruitment agency on behalf of their client with regards this temp-permanent vacancy.

Responsibilities:

  • To cut and prepare hose for assembly
  • Assembly of different hose to a variety of connections
  • Quality checking
  • Completion of all relevant paperwork
  • To work in a small team of assembly operatives
  • To follow all health and safety instructions and procedures

Experience required:

Hose Assembly

Hours of work: Monday – Friday 8.30 am – 5.00pm

40 hour week

Overtime paid at time and a third during the week after 40 hours and time and a half on a Saturday as long as 40 hours have been worked during the week.

Hourly rate : £8.55 per hour

 

Debra Foster's Job Enquiry Form

  • This field is prefilled with our unique job reference
  • Accepted file types: word, pdf, docx, Max. file size: 6 MB.
  • This field is for validation purposes and should be left unchanged.

Assembly Workshop Fitter / Technician

Andy File Associates Limited are working on behalf of their client as a Recruitment Agency with regards this vacancy.

An opportunity to work within a forward thinking Company in the rapidly expanding sector of environmentally friendly vehicles.

Job Specification
Assembly Workshop Fitter/Technician

To perform a variety of mechanical assembly tasks on varying components to include:
* Gearbox assemblies and hydraulic components as well as investigative and repair work
relating to returned items
* To perform any other tasks as required in the build of motors and associated equipment as required

* Motor winding

* Magnetising

*  Motor testing

Key Skills

* Keen and dynamic with a sense of purpose and pride in a job well done

* Fair amount of manual dexterity and patience required

* Methodical approach and competence using computers, working knowledge of excel advantageous

* Preferably apprentice trained in an engineering discipline some machining knowledge would be an advantage
* Safety aware

* Organised and methodical
* Flexible in their approach to working methods
* A willingness to be flexible on working hours when necessary

Rebecca Thomas Job Enquiry Form

  • This field is prefilled with our unique job reference
  • Accepted file types: word, pdf, docx, Max. file size: 6 MB.
  • This field is for validation purposes and should be left unchanged.

General Operatives

Andy File Associates are working as a Recruitment Business on behalf of our client with regards this temporary position.

Our client is a well know name within their industry both nationally and internationally. They are looking to increase the their work force due to continued success. They are looking for another operative to join working in various roles within their production facility.

The role:

  • •Assisting with the production of hot water cylinders through various processes from basic cylinder to finished product
  • Assembly of components, handling some considerably small parts, conducted in a sitting or standing position at a work station.
    • Working off technical plans and assembly kits.

Personal Attributes:

• Ideally possessing some plumbing and production/manufacturing environment experience.
• Have an eye for detail, strive for accuracy and respect quality in all aspects of the work.
• Be an effective communicator and able to work with people at all levels of ability and from different cultures and backgrounds.
• Possess the ability to work well as part of a team or alone.
• Must have Safety Boots

Hours of work:

Mon – Thur – 07.00 -15.30
Friday – 07.00 – 14.00

40 hours paid per week

Anne Braithwaite Job Enquiry Form

  • This field is prefilled with our unique job reference
  • Accepted file types: word, pdf, docx, Max. file size: 6 MB.
  • This field is for validation purposes and should be left unchanged.

Assembly Technician

Andy File Associates Limited are working on behalf of their client as a Recruitment Agency with regards this temp to perm vacancy.

Our client is a manufacturer of vehicle drive systems

They are looking for two additional members of staff to work in their already experienced team.

Main Responsibilities

  • Assembly and machining of rotors
  • Various heat treatment processes relating to motor production
  • Manufacture and build of stators
  • Building of the mechanical aspect of motor control boxes

Skills Required

  • Proactive and flexible approach
  • Excellent attention to detail with a careful and methodical approach
  • A pride in the quality of work produced
  • Manual handling and health and safety knowledge
  • The ability and willingness to undertake any task with training provided
  • A tidy and organised way of maintaining a safe and efficient working area
  • Experience in working in an engineering environment
  • Conversant with using tools and measuring equipment
  • Experience of using machine tools -: lathes, turning machines, water cutting and press breaks.

Hours: Monday to Friday possible overtime and dependent on volume of work some weekend work.

Standard Hours 8.30-4.30 – 37.5 Hours Per week

 

Martin Gowland's Job Enquiry Form

  • This field is prefilled with our unique job reference
  • Accepted file types: word, pdf, docx, Max. file size: 6 MB.
  • This field is for validation purposes and should be left unchanged.

Electro Assembly Team Member

Andy File Associates Limited are working on behalf of their client as a Recruitment Agency with regards this Permanent vacancy.

Responsible for the assembly of products, ensuring correct build standard and quality.

The candidate will also be required to undertake some soldering and cable assembly tasks as well as some system testing. Training will be provided in regard to system testing.

Main Responsibilities

  • Assembly of motor controllers/inverters, data loggers, battery packs
  • Assembly of sub-assemblies
  • Manufacture of cable loom
  • Basic soldering and PCB rework

Skills Required

  • Organised and accurate, with a flexible approach
  • Experience of working in a manufacturing environment
  • Appreciation of quality systems
  • Excellent dexterity and the ability to work on precision assemblies
  • Good level of IT Literacy
  • Motivated and results driven
  • Proactive and able to work under own initiative at times
  • Able to move heavy work piece between workstations
  • Manual Handling

Hours: Monday to Friday possible overtime and dependent on volume of work some weekend work.

Standard Hours 8.30-4.30 – 37.5 Hours Per week

 

Martin Gowland's Job Enquiry Form

  • This field is prefilled with our unique job reference
  • Accepted file types: word, pdf, docx, Max. file size: 6 MB.
  • This field is for validation purposes and should be left unchanged.

Assembly Technician

Andy File Associates are working as a recruitment agency with regards this temporary to permanent position.

To perform a variety of assembly tasks in the manufacture of vehicle drive systems.

To include the following :

Coil winding
Assembly and machining of rotors.
Various heat treatment processes relating to motor production.
Manufacture and build of stators.
Building of the mechanical aspect of motor control boxes

Personal Attributes:

The successful candidate will have mechanical fitting skills and be capable of demonstrating the transfer of these into the above roles.

Personal Skill Requirements:

A careful and methodical approach.
A pride in the quality of their work produced
The ability and willingness to undertake any task with training where required.
A tidy and organised way of maintaining a safe and efficient working area.
It is expected that the candidate will have experience of working in an engineering environment and is fully conversant with tools and measuring equipment.
Experience of using machine tools e.g. Lathes etc. would be a distinct advantage.

 

Martin Gowland's Job Enquiry Form

  • This field is prefilled with our unique job reference
  • Accepted file types: word, pdf, docx, Max. file size: 6 MB.
  • This field is for validation purposes and should be left unchanged.

Electronic/Electrical Technician

Andy File Associates Limited are working on behalf of their client as a Recruitment Agency with regards this permanent vacancy.

Summary of the role:

Reporting the Production/Engineering Manager you will be responsible for producing one off electronic/electrical assemblies and test fixtures. You will also be required to assist in routine maintenance of test fixtures and some vehicle integration work.

Duties Include:

Assembly of electronic and electrical assemblies and test fixtures.
Manufacture of bespoke cable looms
Soldering and PCB rework
First article builds and assisting in New Product Introductions.

Person

Organised and accurate, with a flexible approach.
Experience of working in a similar manufacturing environment.
Appreciation of quality systems.
Excellent dexterity and the ability to work on precision assemblies.
A good level of IT literacy.
Motivated and results driven.
Proactive and able to work under own initiative at times.
Able to move heavy work piece between workstations.
Formal electrical/electronic qualification (ONC-HNC level+).

 

Martin Gowland's Job Enquiry Form

  • This field is prefilled with our unique job reference
  • Accepted file types: word, pdf, docx, Max. file size: 6 MB.
  • This field is for validation purposes and should be left unchanged.